LNS XT320 M9*1 L

Collet Type: Finger Chuck

Inquiry

QUICK DETAILS

1、Usage: Feeding forward bars in automatic lathes
2、Full range of specifications available in 0.1mm increments, offering wear resistance and rigid.
3、Hardness: Bar loader collet are made from special spring steel. The front component with the clamping bore has a hardness of approx. HRc 60– where this is not prevented by the partial tempering. The thread and spring areas are hardened to spring temper.
4、Available for：LNS KT15/KT16/KT20/XT320/M16/M20 Bar Feeder

Part No Guide

Part No	Grade	Φd (Clamp size)	OD (Outer Dia)	AL (Total length)	T (Thread)
PF1560-M9L	Tai Wan 20# Material	2.5~13.0mm	15mm	60mm	M9P1.0
PF1860-M9L		11.5~15.0mm	18mm	60mm	M9P1.0
PF1960-M9L		15.5~16.0mm	19mm	60mm	M9P1.0
PF2060-M9L		16.5~18.0mm	20mm	60mm	M9P1.0
PF2260-M9L		18.5~19.0mm	22mm	60mm	M9P1.0
PF2460-M9L		19.5~21.0mm	24mm	60mm	M9P1.0